Product ID:PROFESSIONAL SUPER NEUTRAL BASE, 80-587
MSDS Date:06/16/1992
FSC:8010
NIIN:00N034406
MSDS Number: BPWGL

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 412-492-5555;304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45-50%

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 15-20%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: MAY BE HARMFUL IF
SWALLOWED. EYE: CAUSES IRRIT. SKIN: MAY CAUSE SLIGHT IRRITATION.
INHAL: VAP & SPRAY MIT MAY BE HARMFUL IF INHALED. VAP GENERATED @
ELEVATED TEMPERATURES IRRITATES EYES , NOSE & THROAT. CHRONIC:
AVOID LONG TERM & REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION & VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
CRACKING, BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED
WITH EXCESSIVE SKIN C ONTACT.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
H*2O FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF H*2O FOLLOWED
BY WASHING W/SOAP/H*2O. INHAL: REMOVE TO FRESH AIR. APPLY ARTF RESP
& OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IFINGEST, ANY TYPE OF
OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT
POIS CTL CTR, EMER ROOM/PHYS IMMED; HAVE MSDS INFO AVAILABLE.

Flash Point Method:PMCC
Extinguishing Media:USE NATL FIRE PROT ASSOC CLASS B EXTING (CO*2, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO (SUPP DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
SPRAY MAY BE INEFFECTIVE. H*2O SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILD-UP & (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE, OR
OTHER ABSORB MATL & PLACE I NTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BLDGS DESIGNED & PROTECTED FROM STORAGE OF NFPA CLASS IIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS THRE RESULTING MIXTURE MAY HAVE
HAZARDS OF ALL OF IT S PARTS.

Respiratory Protection:WHERE VENT IS INADEQUATE, USE A NIOSH/MSHA
APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED BELOW LOWEST SUGGESTED EXPOS (SUPP DATA)
Protective Gloves:IMPERMEABLE GLOVES (SUPP DATA)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROT CLTHG, INCL IMPERMEABLE APRON
CONSTRUCTED OF: NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:EXTING NFPA CLASS IIIB COMBUSTIBLE LIQ FIRES. FIRE FIGHT
PROC: POSS AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H*2O IS
USED, FOG NOZZ ARE PREF. VENT: LIM, LEL BELOW STATED LIM, & TO R
EMOVE DECOMP PROD DURING WELD/FLAME CUTTING ON SURF COATED W/PROD.
PROT GLOVES: CONSTRUCTED OF: NITRILE, NEOPRENE/LATEX.

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.24
Evaporation Rate & Reference:33(BUTYL ACETATE=100)
Solubility in Water:54.9%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARATERISTIC OF THE
CHEMICAL AND ANY SOLVENT.
Percent Volatiles by Volume:65.90

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELD, BRAZ/FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES
INCL: CO.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THORUGH AN APPROVED WAST E MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.